Gana GN-708VN Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Gana GN-708VN. Gana GN-708VN 19 pages. 4ch stand alone dvr with network

Imprimer la page

IV. HOW TO USE

<Auto sequence> time can set in the Menu 'Setup' —> 'Screen' —> 'Sequence'.

If user set camera off in 'Camera' Menu, it will not display on Auto mode. How-

ever, when camera(s) is not connect to DVR, it will be displayed blue screen

that channel. If cameras connected all, user must check BNC connection or

camera status. If you make disable camera in camera setting menu, the screen

will display black screen with that channel.

When DVR run recording, it display camera icon left side bottom on the screen.

User can see status of DVR.

When user want to stop auto mode, just press channel button or mode button

but remote controller has only one mode button so user can press mode button

again then it display each mode, Quad mode and Auto mode.

IV. HOW TO USE

4) LIST Button

overwrited(loop) into 1st event when it recored the 127th event, and the 1st

recorded before will be erased by overwrited. Above on 127th event, this rule

applied.

5) REC Button

from 0% with circulate icon. That mean hard disk is overwriting but data only

erase from beginning point so user can see all data remained (If user play dur-

ing recording, always change begin time and end time.)

User can choose overwrite enable or disable in system setup menu.

It shows happened events by listing

events. When powered-on & off,

started

recording

stopped

recording, it makes lists in order for

user to check what has been recored

and what is recording.

To play event in list, use ▲, ▼ button

to move cursor, and ▲, ▼ button to

turn page. Total recordable scale can

be listed 127 in 13 pages. Each list is

marked in texts for user to recognize

easily.

The 127th event will be

REC is for recording. The picture

shows 8 camera's recording basi-

cally.

The red camera figure from

right paused screen shows that the

recording process, it will disappear

when the recording stops. The date

and time of record are under from

light picture,

The mark " 97% "

shows the space recorded. So in

other words, it shows that the 3%

space of hard disk drive is remained

but after 100% usage, it will start