IKEA KYLIG Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA KYLIG. IKEA KYLIG 28 pages. Ikea kyld refrigerator instruction manual
Également pour IKEA KYLIG : Manuel de l'utilisateur (24 pages), Manuel d'instruction (28 pages), Manuel (48 pages)

Imprimer la page
IKEA KYLIG Manuel
ENGLISH
• The refrigerant circuit and the insulation
materials of this appliance are ozone-
friendly.
• The insulation foam contains flammable
gas. Contact your municipal authority for
information on how to discard the
appliance correctly.

Installation

Warning! Refer to Safety
chapters.
Positioning
This appliance should be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Some functional problems might
occur for some types of models
when operating outside of that
range. The correct operation can
only be guaranteed within the
specified temperature range. If
you have any doubts regarding
where to install the appliance,
please turn to the vendor, to our
customer service or to the
nearest Authorised Service
Centre.
• Do not cause damage to the part of the
cooling unit that is near the heat
exchanger.
Location
To ensure best performance, install the
appliance well away from sources of heat
such as radiators, boilers, direct sunlight etc.
Make sure that air can circulate freely
around the back of the cabinet.
Caution! In order to guarantee
proper functioning in ambient
temperature above 38°C, it is
advised to have a 30mm
separation between the sides of
the appliance and surrounding
furniture.
Electrical Connection
Caution! Any electrical work
required to install this appliance
should be carried out by a
qualified electrician or
competent person.
Warning! This appliance must be
earthed.
The manufacturer declines any
liability should these safety
measures not be observed.
The wires in the mains lead are coloured in
accordance with the following code:
7