Decofire Milano DF102040 Instructions d'assemblage, de sécurité et d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage, de sécurité et d'utilisation pour {nom_de_la_catégorie} Decofire Milano DF102040. Decofire Milano DF102040 17 pages.

Imprimer la page

ASSEMBLY & SETUP

Step 7.

Unscrew the cap on the electronic igniter. Insert a AAA

battery into the housing. Ensure the positive end of the

battery faces outwards.

Screw the cap back on and tighten firmly.

Step 8.

Pour the Lava rock into the burner tray. Spread

the rock evenly around the burner tray.

Step 9.

Fit the glass surround panels. (Applies to all models)

A. Attach the 4 mounting brackets

to the top fire table. Note the

correct orientation of each bracket.

Secure the brackets using the

M6 x 30mm screws.

Do not overtighten.

Page 10

B. Fit the glass panels to each

side. Ensure the panels are

correclty positioned between

each set of brackets.

To ensure trouble free

operation of the burner,

keep the ignition probe

shield clear of any Lava

rock material at all times.

C. Fit the upper glass brackets

to each corner.