decoflame Athlantic Twin Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} decoflame Athlantic Twin. decoflame Athlantic Twin 17 pages. Wall-mounted decoflame bioethanol fireplace

Imprimer la page

1. Operating Instructions

decoflame® Atlantic Series User Manual English – Version 3 – January 2013

Atlantic Series

INSTALLATION GUIDE

ATLANTIC AND ATLANTIC TOWER

Before you start installation of your fireplace,

please check that the packaging is intact and

that all parts as listed below are included.

Contents of the box:

1. Screw-on caps for steel studs (4)

2. Glass screen, 6mm hardened glass (1)

3. Rubber O-rings (4)

4. Brushed stainless steel studs (4)

5. Burner situated in safety chamber, and

slider lid (1 each)

6. Back plate (black aluminium) (1)

7. . Installation in Norway or Sweden: side

covers (2). Installation elsewhere: black

washers (2)

8. Mounting bracket (1)

9. Bolt screws with washers (2 each)

10. Distance pieces (2)

11. Handle for Slider (1)

12. User Manual (1)

Installation of Atlantic and Atlantic

Tower

1. For each countersunk hole in the

mounting bracket first mark perfectly in

level and thereafter drill five holes into the

wall. Use for the type of wall suitable

metal rawlplugs/butterfly screws/

expansion bolts to fit the bracket.

2. Use the screws and washers to fix the

safety chamber onto the back plate. Take

two of the stainless steel studs and fix

them through the bottom holes of the

back plate with the two distance pieces.

Use the remaining two stainless steel

studs to fix both side covers (for installa-

tion in Norway and Sweden) and the back

plate to the mounting bracket by screwing

them through the top holes in the back

plate into the holes in the mounting

bracket. For installation in all other

countries, please use the two black

washers instead of the side brackets. Do

not force those studs into the threaded

holes! Do not screw them in completely

but leave them slightly loose.

3. Place the burner inside the safety

chamber and its slider lid on top of it - the

little stud facing to the right. Slide rubber

O-rings onto the four stainless steel studs,

place the glass screen onto the studs

resting it on the O-rings and fix with the

screw-on caps without tightening them

completely. Now tighten the upper studs

left and right. Tighten the screw on caps.

Should you find that a hole in the glass

screen seems out of place, unscrew the

relevant stud slightly which will help fitting

the glass screen.