decoflame Denver Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} decoflame Denver. decoflame Denver 16 pages. Custom-made bioethanol fireplaces with decoflame e-ribbon fire featuring cevb technology
Également pour decoflame Denver : Manuel d'installation et d'utilisation (10 pages)
![decoflame Denver Manuel de l'utilisateur](/uploads/products/server2/2063593/2063593.jpg)
1. CONTENTS OF THE BOx
1.
Denver Basic™ burner with the power cable attached
2.
User manual
3.
Funnel
4.
Two straps for installation
5.
Remote controller (if Denver Basic™ with upgrades has been purchased)
6.
One glass screen with two glass holders (extra glass with glass holders, if purchased)
2. GENERAL INFORMATION
All Decoflame fireplaces are designed, manufactured and quality-tested in Denmark with the highest
product safety and user-friendliness in mind. Denver Basic™ with CEVB Technology (Controlled Ethanol
Vapour Burning Technology) can be operated via control panel. Alternatively, the burner can be oper-
ated with a remote controller or via Bluetooth/Decoflame App, if these upgrades have been purchased.
Naturally, safety is imperative when dealing with open fire. Please strictly adhere at all times to all safety
measures described in this manual.
3. POSITIONING AND SAFETY
Make sure that your fireplace is installed in a safe place indoors, which means in a wall made of
non-flammable material with a distance of at least 1 meter to e.g. curtains, as shown below (Figure 3.1).
Also, choose a position for your fireplace which is not exposed to any draught, as bioethanol is a volatile
fluid. In fact, only the vapour of the bioethanol is burning when lit. You should not touch the flames of the
lit fireplace or blow into the flames. You should also keep a distance of at least 30 cm moving past the
fireplace, as your movement may have an impact on the flames.
The electronics of your Decoflame fireplace require a connection to a power socket (220-240V earth
– 50Hz – 1kW), which ideally should be placed inside the wall cut-out.
Figure 3.1
Copyright Decoflame ApS.
Heat Zone - Up to 60°C
Use Appropiate Material
min. 50mm
min. 1000 mm
min. 300mm
4
min. 1000 mm
®