decoflame URBAN 104A Manuel d'instruction - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} decoflame URBAN 104A. decoflame URBAN 104A 7 pages.
The flames will reach their maximum height within 15 to 30 minutes, depending on the combustible
fuel temperature. During this period, a slight odour may appear. If necessary, air out the room for a
few minutes.
Let the fire burn until all of the fuel has been depleted. You can extinguish the fire at all times simply by
completely closing the burner. If you have to relight the fireplace when the fuel is still hot, be very
careful as the gas residue is likely to cause a large flame. Do not try to extinguish the flames with an
object other than the designated trap.
Keep children and pets away while operating the fireplace and especially while lighting it up. Never add
fuel if the fireplace is in operation, wait until the burner and the fireplace have cooled before refilling.
Do not touch the fireplace or the burner while it is in operation: serious burns may occur.
EXTINGUISHING :
Keep the glass doors closed.
Pull the trap door completely closed.
WHILE USING :
Constantly monitor the device as soon as the fire has been started.
Have class B fire extinction devices nearby.
In case of a burn, call the nearest hospital.
Consult a Doctor if in doubt of any severe burn.
Igniting the fireplace implies that you have carefully read and will follow these directions.
When the contents of the burner have completely been consumed, wait until the burner has cooled
before moving it. After each use, it is recommended to clean the burner using a sponge or rag and
soapy water and then rinse with clear water. When the burner is dry, it can be refilled. If the burner is
not cleaned after each use, odours may occur.
After several uses, the burner will turn light brown due to the heat. This can be removed by rubbing
with the rough side of a sponge; always rub in the same direction as the streaks.
All the fireplace elements can be cleaned in soapy water with a sponge or a rag, then rinse with clear
water.
Make sure that the shut off device works properly before lighting.
We guarantee the good performance of your fireplace with the use of the
fuel only.
CLEANING THE BURNER
CLEANING THE FIREPLACE
decofuel
» combustible
«
5