Gannet Pro Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Gannet Pro. Gannet Pro 19 pages.
Également pour Gannet Pro : Manuel (5 pages)
Imprimer la page
The remote control has been coded with the receiver of the aircraft at the factory, and the
parameters have been debugged. If it is not necessary, please do not modify the settings of the
remote control and not touch the fine-tuning buttons of each channel of the remote controller.
Otherwise, the aircraft/remote controller will not
work.
(The picture of remote control
below is the left-hand throttle
GANNET LITE
Switch
Position
SWC
Middle
Down
Note:
The
remote control dials the dial switch to the top, otherwise the remote control will
display a warning
.
If there is a sound of dripping after turning on the remote control. indicate that the battery voltage
is too low, please replace the remote-control battery immediately.
Be sure to start the remote control before connecting the aircraft battery; when shutting down,
first remove the aircraft battery and then turn off the remote controller.
GANNET LITE
) RSA
Function
Up
GPS
mode
Attitude Mode
Return mode
Switch
Position
SWC
UP
Middle
DOWN
Position
OFF
Navigation Lock
RETURN POINT
LOCK