decon Liberty LBM7213 Manuel d'instructions de montage - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} decon Liberty LBM7213. decon Liberty LBM7213 9 pages. Mounting set etac cross 6 / cross 6 long

Imprimer la page

__________________________________________________________________________________

INFO

The position of the wheelchair´s rear wheels can

affect the position of the screws (J) and holder

adapter bar (D). The positioning of the assembly

that pictures are showing can vary depending on

the position of the rear wheels of the wheelchair.

On the Cross 6 Long version it is most likely that

all the screws (J) will be positioned in front of the

wheelchair's brakes.

Now mount the complete adapter bar

that consists of center pipe (A), outer

pipe (B) and clamp (C). The complete

adapter bar is mounted into the

holders (D) by using the QR-pins (E).

Make sure the ends of the outer pipe

(B) are parallell otherwise it can be

hard to assemble it into the holders

(D). It shall be possible to move the

center pipe sideways and also rotate

it if correctly assembled.

Now tighten all the screws (J) that holds the adapter plate in place.

INFO

Check that the arrow on the labeling mounted on the center pipe (A) is pointing towards the

front of the wheelchair. If the center pipe (A) is mounted the wrong way around it will not be

possible to attach Liberty to the bar.

__________________________________________________________________________________

Sida 5/9

Mounting set

LBM7013, LBM7113, LBM7213