IKEA BEJUBLAD Manuel d'instruction - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} IKEA BEJUBLAD. IKEA BEJUBLAD 36 pages. Ikea oven
Également pour IKEA BEJUBLAD : Manuel de l'utilisateur (28 pages), Manuel (24 pages), Manuel (48 pages), Manuel (16 pages), Manuel (8 pages), Manuel (41 pages), Manuel (20 pages), Manuel (32 pages), Manuel d'instruction (24 pages)

Imprimer la page

ENGLISH

Technical data

The technical informations are situated in

the rating plate inside the appliance.

Installation

After unpacking the oven, make sure that

it has not been damaged during transport

and that the oven door closes properly. In

the event of problems, contact the dealer or

your nearest Authorized Service Centre. To

prevent any damage, only remove the oven

from its polystyrene foam base at the time

of installation.

Preparing the housing unit

•

Kitchen units in contact with the oven

must be heat resistant (min 90°C).

•

Carry out all cabinet cutting work before

fitting the oven in the housing and

remove all wood chips and sawdust.

•

After installation, the bottom of the oven

must no longer be accessible.

•

For correct appliance operation, do

not obstruct the minimum gap between

the worktop and the upper edge of the

oven.

General recommendations

Before use

Remove cardboard protection pieces,

protective film and adhesive labels from

accessories.

Do not remove the rating plate situated

on the right side of the door frame.

Remove the accessories from the oven

and heat it at 200° for about an hour

to eliminate the smell and fumes from

the insulating materials and protective

grease.

During use

Do not place heavy objects on the door

as they could damage it.

Do not cling to the door or hang

anything from the handle.

Do not cover the inside of the oven with

aluminium foil.

Never pour water into the inside of a

hot oven; this could damage the enamel

coating.

Never drag pots or pans across the

bottom of the oven as this could damage

the enamel coating.

Make sure that the electrical cables of

other appliances do not touch hot parts

of the oven or become trapped in the

door.

Do not expose the oven to atmospheric

agents.