Century Helicopter Products RD6000 Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Century Helicopter Products RD6000. Century Helicopter Products RD6000 4 pages.
Imprimer la pageFirst please refer to the instruction manual provided with your radio system.
Airtronics RD6000 transmitter
button pad.
Use the button pad to navigate to each screen
and make step by step changes to configure
the transmitter for the CP Elite.
First please refer to the instruction manual
provided with your radio system.
Airtronics RD6000 transmitter setting screen
Channel Indicator
Model #
Throttle
Trim
Rudder
Trim
Indicated voltage will vary based on the charge status of the battery.
This is an addendum instruction provided for your convenience. These
instructions are specially designed for Hummingbird Elite CP owners who
want a step-by-step procedure for the Airtronics RD6000.
Battery can be removed from it's case for replacement.
After your system is fully charged flip the
power switch and begin following the
directions on the following page.
Main Screen
The charge jack can be found on
the right hand side of the transmit-
ter. 110V wall type charger is
included with radio.
Resetting the Airtronics
RD6000 transmitter
Use these
Flight
steps if you
Mode
feel you have
Frequency
made a
Type
mistake or you
are entering a
Elevator
configuration
Trim
for a new
model. Then
Aileron
proceed to
Trim
step 1.
*Actual EPA %
values may vary
depending on
equipment used.
Home acro
Screen
Left x 1
Press
STW etc Screen
Press
Down x 12
TYP acro Screen
Press
Right x 1
TYP heli confirm
inc+/yes
Press
x 1
Finished
Press
x 3
end