IKEA KULINARISK Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA KULINARISK. IKEA KULINARISK 20 pages. Oven with steam feature
Également pour IKEA KULINARISK : Manuel d'instruction (20 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (32 pages), Manuel (36 pages), Manuel d'instruction (48 pages), Manuel d'instructions (36 pages), Manuel (24 pages), Manuel d'instructions d'installation (36 pages), Manuel (44 pages), Manuel de l'utilisateur (36 pages), Manuel (40 pages), Manuel (40 pages), Manuel de l'utilisateur (20 pages), Manuel (37 pages), Manuel (32 pages), Manuel de démarrage rapide (16 pages), Manuel (20 pages), Manuel (20 pages), Manuel (36 pages), Manuel (21 pages), Manuel de démarrage rapide (8 pages), Manuel (40 pages), Manuel (20 pages), Manuel (32 pages), Manuel (36 pages), Manuel (17 pages)

ENGLISH

• Connect the extractor to the exhaust flue through a pipe

of minimum diameter 120 mm. The route of the flue

must be as short as possible.

• Do not connect the extractor hood to exhaust ducts

carrying combustion fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-electrical

appliances (e.g. gas burning appliances), a sufficient

degree of aeration must be guaranteed in the room in

order to prevent the backflow of exhaust gas. When

the cooker hood is used in conjunction with appliances

supplied with energy other than electric, the negative

pressure in the room must not exceed 0,04 mbar to

prevent fumes being drawn back into the room by the

cooker hood.

• The air must not be discharged into a flue that is used

for exhausting fumes from appliances burning gas or

other fuels.

• If the supply cord is damaged, it must be replaced from

the manufacturer or its service agent.

• Connect the plug to a socket complying with current

regulations, located in an accessible place.

• With regards to the technical and safety measures to

be adopted for fume discharging it is importat to closely

follow the regulations provided by the local authorities.

WARNING: Before installing the Hood, remove the

protective films.

• Use only screws and small parts in support of the hood.

WARNING: Failure to install the screws or fixing

device in accordance with these instructions may

result in electrical hazards.

• Connect the hood to the power net by using a bipolar

switch having a contact gap of at least 3 mm.

• Do not look directly at the light through optical devices

(binoculars, magnifying glasses...).