Airflow PVM610 Manuel d'utilisation et d'entretien - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Airflow PVM610. Airflow PVM610 16 pages. Ventilation testing / micromanometer
Imprimer la page- 1. Table of Contents
- 1. Chapter 1 Unpacking and Parts Identification
- 2. Chapter 2 Setting-Up
- 2. Irflow Pvm610
- 2. Installing the Batteries
- 3. Chapter 3 Operation
- 3. Keypad Functions
- 4. Chapter 4 Maintenance
- 4. Recalibration
- 4. Cases
- 4. Storage
- 5. Chapter 5 Troubleshooting
- 6. Appendix A Specifications
Chapter 5
Troubleshooting
Table 5-1 lists the symptoms, possible causes, and recommended solutions
for common problems encountered with the Alnor AXD610/A
PVM610. If your symptom is not listed, or if none of the solutions solves
your problem, please contact TSI.
Table 5-1: Troubleshooting the Alnor AXD610/A
Symptom
No Display
Velocity reading
fluctuates unstable
Instrument Error
message appears
The pressure sensor is protected from damage up to 7 psi (48 kPa or
360 mmHg). At higher pressure it can burst!
Possible Causes
Unit not turned on
Low or dead batteries
Dirty battery contacts
Fluctuating flow
Fault in instrument
WARNING
IRFLOW
PVM610
IRFLOW
Corrective Action
Switch unit on.
Replace batteries.
Clean the battery
contacts.
Reposition probe in
less-turbulent flow.
Factory service required
on instrument.
!
9