IKEA LIVSLAGA Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} IKEA LIVSLAGA. IKEA LIVSLAGA 40 pages. Burner
Également pour IKEA LIVSLAGA : Manuel de l'utilisateur (24 pages), Manuel d'instructions de montage (20 pages), Manuel de l'utilisateur (20 pages)

Imprimer la page

ENGLISH

Technical data

Dimensions

Width (mm)

Height (mm)

Length (mm)

Voltage (V)

The technical information are situated in the

rating plate on the bottom side of the appliance.

Installation

After unpacking the hob, make sure that it

has not been damaged during transport. In

the event of problems, contact the dealer or

your nearest After-sales Service.

Technical information for the installer

This product can be embedded in a

worktop 20 to 50 mm thick.

If there is no oven beneath the hob,

insert a separator panel that has a

surface at least equal to the opening

in the work surface. This panel must be

positioned in no case less than 20 mm

from the bottom of the hob.

Before installation, make sure that:

the local gas delivery conditions (nature

and pressure) are compatible with the

settings of the hob (see the rating plate

and injector table);

the outer surfaces of the furniture or

appliances adjacent to the hob are heat

resistant according to local regulations;

This appliance is not connected to a

730

510

220 - 240

fume exhaust device. It shall be installed

in accordance with current installation

regulations. Particular attention shall

be given to the relevant requirement

regarding ventilation.

Combustion products are discharged

outdoors through specific hoods or wall

and/or window mounted electrical fans.

Gas connection

This operation must be performed by a

qualified technician.

The gas supply system must comply with

local regulations to the relavant gas

standard.

You can find specific local regulations

for some countries in the paragraph

"Reference to Local Regulations". If no

information concerning your Country is

given, please ask details to a qualified

technician.

The connection of the hob to the gas

pipe network or gas cylinder must be