Gantom Gantom 7 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Gantom Gantom 7. Gantom Gantom 7 8 pages. Compact seven color dmx spotlight

Imprimer la page

then flashing blue 5 times. If it is assigned to DMX address 038, it will report its channel mapping profile

then report its address by flashing red 0 times, then flashing green 3 times, then flashing blue 8 times.

TURN OFF/ON boot sequence flashing: You may not want your fixture to report its channel mapping

profile and address every time it receives power. In order to toggle the boot sequence flashes on/off,

follow these steps. First, tap the number field next to the word "Address". A new screen will appear

asking you to enter a DMX start address. Enter the number 512. Finally, hit the "Assign Address" button.

This will not actually change the DMX address of the light fixture, it will simply toggle the boot sequence

flashing either on or off.

Some applications may not require live DMX control. In order to configure your Gantom 7 for

standalone operation, all you must do is use the channel sliders on the Generic Console screen to set the

desired levels for each channel. Once the light has the desired output, tap the "STORE AS DEFAULT"

button at the lower left portion of the screen to save this setting directly into the light fixture.

Now, when the light fixture receives power it will automatically go to this newly saved DEFAULT setting

once it's boot sequence is complete.

Please note that if DMX signal is passed to the fixture while it is operating in standalone mode, the DMX

signal will override the standalone setting.

The Gantom 7 was designed for use with standard DMX512 control systems. In order to maximize

compatibility with existing control hardware and software, the Gantom 7 has several different DMX

channel mapping profiles available. Some users may prefer to operate the Gantom 7 as though it were

an RGBW or RGBA fixture because there are readily available preset profiles for those fixtures on many

existing DMX control environments. The Gantom 7 has five channel mapping profiles available: RGB,

RGBA, RGBW, (MASTER)RGBAWU, and (MASTER)RGBAWLU.

RGB

CH1

Red (0-100%)

CH2

Green (0-100%) Green (0-100%) Green (0-100%) Red (0-100%)

CH3

Blue (0-100%)

CH4

Amber (0-100%) White (0-100%) Blue (0-100%)

CH5

CH6

CH7

CH8

STANDALONE OPERATION

DMX CONTROLLED OPERATION

DMX Channel Mapping Profiles

RGBA

RGBW

Red (0-100%)

MASTER DIMMER (0-100%) MASTER DIMMER (0-100%)

Blue (0-100%)

Green (0-100%)

Amber (0-100%)

White (0-100%)

Ultraviolet (0-100%)

Gantom 7 User Guide

(M)RGBAWU

(M)RGBAWLU

Red (0-100%)

Green (0-100%)

Blue (0-100%)

Amber (0-100%)

White (0-100%)

Lime (0-100%)

Ultraviolet (0-100%)

Version 1.0 – 12/15/2017