deconta AS 300 Livre manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Livre manuel pour {nom_de_la_catégorie} deconta AS 300. deconta AS 300 15 pages. Waste water filtration unit

Before the initial operation of the sewage pump or after a long standstill you have to

control if you can turn the spindle by hand. For this purpose, insert a screw driver in the

slot in the shaft end of the fan side and move the shaft. If the pump is new, you will have

a strong turning resistance in the running wheel, but it will relieve after some time.

 Fill waste water pump fully through vent connection

 Tighten the cap nut of the filter housing by hand

Connection „OUT"

Cap nut

 Connect waste water hose with proximity switch at „IN" of the coarse pre filter and

then connect to place of use (only use spiral hose)

 Connect „OUT" with gully

 Establish power supply 230V, 50Hz (Schuko plug)

Guide book

AS 300 G

7 Initial operation

Connection „IN"

Coarse pre filter

Seite 9