Afriso EURO-INDEX Unimes E Manuel d'utilisation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Afriso EURO-INDEX Unimes E. Afriso EURO-INDEX Unimes E 20 pages. Mechanical tank contents gauge with electronic remote indication

Imprimer la page
7.2

Display formats of the remote indicator

7.3

Correcting the tank data of the remote indicator

7.4

Subsequent zero point adjustment at the remote indicator

Unimes E
Direct indication gauge
The liquid level is displayed in %.
Remote indicator
Keep pressing the F key to select one of the four available units
for the level:
•
Indication of volume in litres.
The arrow at the bottom of the display points to "Litres".
•
Indication of volume in m³.
The arrow at the bottom of the display points to m³.
•
Indication of volume in % of total contents.
The arrow at the bottom of the display points to %.
•
Indication of liquid level in mm.
The arrow at the bottom of the display points to FH.
If the measured value exceeds the set tank data (e.g. due to incor-
rect tank data), the display starts to flash. The display toggles be-
tween the displayed value and "----". Only the current liquid level in
mm is displayed permanently.
1.
Hold down the keys
vate the "Enter Tank Data" mode.
The upper left corner of the display shows the symbol
2.
The individual tank data can be checked and/or overwritten as
described in chapter 6.1, page 11.
If you do not want to change tank data, press the F key four
times to return to the normal measurement mode.
The upper left corner of the display no longer shows the symbol
.
The pointer of the direct indication gauge points to zero.
1.
Unplug the battery connector from the PCB.
2.
Proceed as described in chapter 6.6, page 13, to chapter 6.8,
page 15.
If you press the mini button when connecting the battery con-
nector, all tank data is cleared.
simultaneously for 3 seconds to acti-
Operation
.
17