Afriso EURO-INDEX Unimes E Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Afriso EURO-INDEX Unimes E. Afriso EURO-INDEX Unimes E 20 pages. Mechanical tank contents gauge with electronic remote indication

2

Safety

2.1

Intended use

2.2

Predictable incorrect application

2.3

Safe handling

Unimes E
Unimes E is only suitable for continuous level measurement in tanks
containing fuel oil EL, diesel and other low-viscosity media which do
not attack the materials used (refer to chapter 4, page 9). For tank
heights from 900 to 2000 mm.
Any use other than the application explicitly permitted in this instruc-
tion manual is not permitted.
Unimes E must never be used in the following cases:
Hazardous areas (ex)
Applications involving persons and animals
Unimes E represents state-of-the-art technology and is made ac-
cording to the pertinent safety regulations. Each device is subjected
to a function and safety test prior to shipping.
Operate Unimes E only when it is in perfect condition. Always
observe the operating instructions, all pertinent local and na-
tional directives and guidelines as well as the applicable safety
regulations and directives concerning the prevention of acci-
dents.
Unimes E is not safety equipment. It does not replace the func-
tion of a level sensor at the fuel oil tank.
Unimes E may only be installed in unpressurised tanks. An ap-
proved tank vent and a fully functional level sensor must be in-
stalled.
The measured values displayed, in particular the values of the
litre indication, must not be used for billing purposes. The accu-
racy of the measured values displayed depends on the accu-
racy of the tank data determined and entered. Therefore, the
accuracy required for billing purposes cannot be guaranteed by
the manufacturer.
Extreme environmental conditions have negative effects on the func-
tion of the product.
Protect the product from shocks.
Only use the product in rooms.
Protect the product from humidity.
Safety
5