HIKVISION H1T Series Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION H1T Series. HIKVISION H1T Series 14 pages. Turbo hd dome camera
Également pour HIKVISION H1T Series : Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (14 pages), Manuel de l'utilisateur (14 pages)

Figure 2-3 Attach the Mounting Base to the Ceiling

Note:

In the supplied screw package, both self-tapping



screws and expansion bolts are contained.

For cement ceiling/wall, expansion bolts are



required to fix the camera. For wooden ceiling/wall,

self-tapping screws are required.

6. Route the cables through the cable hole, or the side

opening.

7. Align the camera with the mounting base, and

tighten the screws to secure the camera on the

mounting base.

Figure 2-4 Secure the Camera with Mounting Base

8. Connect the corresponding cables, such as power

cord, and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

1). Hold the camera body and rotate the enclosure

to adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

Pan Position Range

[0° to 360°]

Tilt Position Range

[0°to 75°]

2.1.2 Mounting with Inclined Base

Steps:

1. Paste the drill template to the desired place on the

celling/wall.

2. Drill screw holes and the cable hole on the

ceiling/wall according to the supplied drill template.

Figure 2-5 3-axis Adjustment

Rotation Position Range

[0°to 360°]