HIKVISION H1T Series Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION H1T Series. HIKVISION H1T Series 17 pages. Turbo hd dome camera
Également pour HIKVISION H1T Series : Manuel de l'utilisateur (14 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (14 pages), Manuel de l'utilisateur (14 pages)

Note:

Cable hole is required, when adopting the ceiling

outlet to route cables.

3. Loosen the set screws with a hex wrench (supplied)

to remove the bubble.

4. Fix the mounting base on the ceiling with supplied

screws.

Figure 2-21 Fix the Mounting Base

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and network cable.

7. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle

0° to 75°

Figure 2-22 Type I Camera 2-Axis Adjustment

1). Loosen the tilt adjusting screw to adjust the tilt

position [0° to 75°].

Hole A: for cables routed through the ceiling

screw hole 1: for Mounting Base

Figure 2-19 Drill Template

Figure 2-20 Remove the Bubble

0° to 355°

Adjusting Screw

0° to 355°