IKEA 103.923.33 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA 103.923.33. IKEA 103.923.33 8 pages.

Imprimer la page

ENGLISH

Product description

Control panel

Turns the motor on/off at speed one.

Speed

Turns the motor on at speed two / Activate charcoal filter

alarm.

Press and hold the button for approximately 2 seconds, with

all the loads turned off (Motor+Lights), to turn the Activated

Speed

Charcoal Filter alarm on. LED (A) flashes twice to confirm

To turn the alarm off, press the button again and hold for

at least 2 seconds.The relevant LED flashes once (A). Only for

recirculation mode.

Turns the Motor on at speed three / Reset alarm grease

filter saturation.

Press and hold the button for approximately 2 sec-

Speed

onds, with all the loads turned off (Motor+Lights), to

reset the grease filter saturation alarm. LED (A) flashes

three times.

Turns the motor on at Booster speed.

This speed is timed to run for 6 minutes. At the end of this

time, the system returns automatically to the speed that was

set before. If it is activated with the motor turned off, it will

Speed

switch to OFF at the end of the time. To deactivate it, press

button D or press button A.

Press briefly: Turns the lighting system on and off at

maximum intensity.

Light

Press and hold to change the lighting intensity up or down.

Upper chimney

Lower chimney

Hood body

LED Lighting

Grease filter

Control panel

Filters Alarm.

When the filter alarm is activated, the following messages

will appear over time:

Grease filter alarm must be cleaned: "A" key flashes once

per second.

Anti-odour filter alarm must be cleaned: "A" key flashes

twice per second.

Once the filters have been regenerated reset the alarm

signal.