IKEA KULINARISK Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA KULINARISK. IKEA KULINARISK 20 pages. Oven with steam feature
Également pour IKEA KULINARISK : Manuel d'instruction (20 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (32 pages), Manuel (36 pages), Manuel d'instruction (48 pages), Manuel d'instructions (36 pages), Manuel (24 pages), Manuel d'instructions d'installation (36 pages), Manuel (44 pages), Manuel de l'utilisateur (36 pages), Manuel (40 pages), Manuel (40 pages), Manuel de l'utilisateur (20 pages), Manuel (37 pages), Manuel (32 pages), Manuel de démarrage rapide (16 pages), Manuel (20 pages), Manuel (20 pages), Manuel (36 pages), Manuel (21 pages), Manuel de démarrage rapide (8 pages), Manuel (40 pages), Manuel (20 pages), Manuel (32 pages), Manuel (36 pages), Manuel (17 pages)

IKEA KULINARISK Manuel
ENGLISH
• Connect the extractor to the exhaust flue through a pipe
of minimum diameter 120 mm. The route of the flue
must be as short as possible.
• Do not connect the extractor hood to exhaust ducts
carrying combustion fumes (boilers, fireplaces, etc.).
• If the extractor is used in conjunction with non-electrical
appliances (e.g. gas burning appliances), a sufficient
degree of aeration must be guaranteed in the room in
order to prevent the backflow of exhaust gas. When
the cooker hood is used in conjunction with appliances
supplied with energy other than electric, the negative
pressure in the room must not exceed 0,04 mbar to
prevent fumes being drawn back into the room by the
cooker hood.
• The air must not be discharged into a flue that is used
for exhausting fumes from appliances burning gas or
other fuels.
• If the supply cord is damaged, it must be replaced from
the manufacturer or its service agent.
• Connect the plug to a socket complying with current
regulations, located in an accessible place.
• With regards to the technical and safety measures to
be adopted for fume discharging it is importat to closely
follow the regulations provided by the local authorities.
WARNING: Before installing the Hood, remove the
protective films.
• Use only screws and small parts in support of the hood.
WARNING: Failure to install the screws or fixing
device in accordance with these instructions may
result in electrical hazards.
• Connect the hood to the power net by using a bipolar
switch having a contact gap of at least 3 mm.
• Do not look directly at the light through optical devices
(binoculars, magnifying glasses...).
5