Ganz ZC-DN5212NXA Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Ganz ZC-DN5212NXA. Ganz ZC-DN5212NXA 12 pages. Mini dome camera
Également pour Ganz ZC-DN5212NXA : Manuel d'instruction (12 pages)

Imprimer la page

PART NAMES



Exterior

Body cover

Surface mount cover

Video relay cable

Camera body



Accessories

Service monitor cable

Removing and attaching the cover

• Dome cover

To remove : Pull the cover away.

To attach :

Insert the cover and push it gently until you

hear a click.

• Body cover

To remove : Insert a flat-bladed screwdriver into the

groove between the camera body and the

body cover, then twist the screwdriver.

To attach :

Align the corrugations on the camera body

and body cover, then push until you hear a click.

Inner cover

Dome cover

M4 x 20 2 pcs.

Self-tapping screws

Adapter ring

Flat-bladed

screwdriver



Camera body interior

1 Lens

2 Focus/

View angle

adjustment lever

3 Power input

terminal

1 Lens

∞

N : Focus adjustment lever

T : View angle adjustment lever

Positioning of the lens body angle/focus adjustment lever varies depending on the lens. Please

refer to the above guides for operation marked on the side of the levers while using the product.

3 Power input terminal

4 Menu Operation Switch

5 Video output connector for service monitor

6 Video relay cable

7 Termination resistance switch (with communication function)

8 B/W Fix terminal/Mode Selection terminal

9 RS485 communication terminal (with communication function)

EG-4

4 Menu Operation Switch

5 Video output connector

for service monitor

7 Termination

resistance switch (with

communication function)

8 B/W Fix terminal/Mode

Selection terminal

9 RS485 communication

terminal (with

communication function)

6 Video relay cable