Ganz ZC-DN5212NXA Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Ganz ZC-DN5212NXA. Ganz ZC-DN5212NXA 12 pages. Mini dome camera
Également pour Ganz ZC-DN5212NXA : Manuel d'instruction (12 pages)

Ganz ZC-DN5212NXA Manuel d'instruction

PART NAMES

Exterior
Body cover
Surface mount cover
Video relay cable
Camera body
Accessories
Service monitor cable
Removing and attaching the cover
• Dome cover
To remove : Pull the cover away.
To attach :
Insert the cover and push it gently until you
hear a click.
• Body cover
To remove : Insert a flat-bladed screwdriver into the
groove between the camera body and the
body cover, then twist the screwdriver.
To attach :
Align the corrugations on the camera body
and body cover, then push until you hear a click.
Inner cover
Dome cover
M4 x 20 2 pcs.
Self-tapping screws
Adapter ring
Flat-bladed
screwdriver
Camera body interior
1 Lens
2 Focus/
View angle
adjustment lever
3 Power input
terminal
1 Lens
N : Focus adjustment lever
2
W
T : View angle adjustment lever
Positioning of the lens body angle/focus adjustment lever varies depending on the lens. Please
refer to the above guides for operation marked on the side of the levers while using the product.
3 Power input terminal
4 Menu Operation Switch
5 Video output connector for service monitor
6 Video relay cable
7 Termination resistance switch (with communication function)
8 B/W Fix terminal/Mode Selection terminal
9 RS485 communication terminal (with communication function)
EG-4
4 Menu Operation Switch
5 Video output connector
for service monitor
7 Termination
resistance switch (with
communication function)
8 B/W Fix terminal/Mode
Selection terminal
9 RS485 communication
terminal (with
communication function)
6 Video relay cable