IKEA RYTMISK 803.921.36 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA RYTMISK 803.921.36. IKEA RYTMISK 803.921.36 20 pages.

ENGLISH

cording to the wiring system regulations.

• For Class I appliances, check that the domestic power supply

has a suitable earthing connection.

• Connect the hood to the flue with a pipe with a minimum dia-

meter of 120 mm. The fume path must be as short as possible.

• All the regulations regarding air discharge must be complied

with.

• Do not connect the extractor hood to exhaust ducts carrying

combustion fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-electrical appli-

ances (e.g. gas burning appliances), a sufficient degree of

ventilation must be guaranteed in the room in order to pre-

vent the backflow of exhaust gas. When the cooker hood is

used in conjunction with appliances supplied with energy

other than electricity, the negative pressure in the room must

not exceed 4 Pa mbar to prevent fumes being drawn back into

the room by the cooker hood.

• The air must not be discharged into a flue that is used for ex-

hausting fumes from appliances burning gas or other fuels.

• The power cord, if damaged, must be replaced by the manu-

facturer or by a service technician.

• Connect the plug to a socket complying with current regula-

tions, located in an accessible place.

• Regarding the technical and safety measures to be adopted

for fume discharging it is important to strictly follow the regu-

lations provided by the local authorities.

WARNING: Before installing the hood, remove the protective

films.

• Use only screws and small parts of a type suitable for the hood.