Ganz ZN-D2024 Manuel d'installation rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Ganz ZN-D2024. Ganz ZN-D2024 13 pages. Indoor ip dome camera
Imprimer la page
3
Hardware Installation
First, use the supplied screwdriver to detach the dome cover from the camera base. Then,
follow the steps below to install the camera; either to a ceiling or to a wall.
When mounting to a ceiling
Through the two holes on each side of the camera base, insert the supplied two screws
to corresponding holes and secure them with a screwdriver.
When mounting to a wall
1. Attach the alignment sticker to the wall.
2. Through the two circles on the sticker, drill two pilot holes into the wall.
3. Hammer the supplied plastic anchors into the holes.
4. Align the two holes on each side of the camera base with the two plastic anchors on
the wall, insert the supplied screws to corresponding holes and secure them with a
screwdriver.
Alignment sticker
5