Avantco 178SSPTM4812 Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco 178SSPTM4812. Avantco 178SSPTM4812 16 pages. Prep tables
Imprimer la page
Troubleshooting
Problem
Compressor is
Not Running
Cabinet Temperature
is too Warm
User Manual
Refrigerated Prep Tables
Possible Solution
Fuse blown or circuit breaker tripped
Replace fuse or reset circuit breaker
Power cord unplugged
Plug in power cord
Thermostat set too high
Set thermostat to lower temperature
Cabinet in defrost cycle
Wait for defrost cycle to finish
Thermostat is set too high
Set thermostat to lower temperature
Airflow is blocked
Re-arrange products to allow for proper airflow
Make sure there is at least four inches of clearance from the evaporator
Excessive amount of warm product placed in cabinet
Allow adequate time for product to cool down
Fuse blown or circuit breaker tripped
Replace fuse or reset circuit breaker
Dirty condenser coil
Clean the condenser coil
Evaporator coil iced over
Ensure doors are closed when not in use
Avoid opening doors for long periods of time
Low refrigerant levels
Contact a service technician to check refrigerant levels
Door is slightly ajar
Make sure doors are completely closed
www.AvantcoRefrigeration.com
15