Avantco 178SSUD3R Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco 178SSUD3R. Avantco 178SSUD3R 10 pages.

Electrical

• Please ensure that the required voltage of the compressor is being supplied at all times. Low or

high voltage can detrimentally affect the refrigeration unit.

• All units should be plugged into a grounded and properly-sized electrical outlet with appropriate

overcurrent protection. Please refer to the electrical requirements on the nameplate.

• Please make sure that your unit has its own dedicated outlet.

• Do not use an extension cord.

Temperature Controls

• Refrigerant LED - Compressor is on

• Fan LED - Fan is on

• Defrost LED - Defrost cycle is running

Functions

Your new refrigerator or freezer is already factory-set to run at optimum temperatures for food

safety and should require no adjustments.

Refrigerators are set to cycle between a minimum temperature of 33 degrees Fahrenheit and a

maximum temperature of 40 degrees Fahrenheit.

Freezers are set to cycle between a minimum temperature of -5 degrees Fahrenheit and a maximum

temperature of 2 degrees Fahrenheit.

Adjusting the temperature changes the minimum temperature your unit will run at. Your unit will not

run constantly at this setting. To change it, follow these instructions:

Digital Control Units

• Hold "SET" for 1 sec. The display will flash the current minimum temperature.

• Use the arrow buttons to adjust the minimum temperature you want it to run at.

• Press "SET" again to save your settings

Always remember to calculate the differential if you change the minimum temperature setting. The

cabinet temperature will fluctuate up to +7 degrees over your set minimum temperature as the

compressor runs and shuts off. Setting the temperature too high will result in unsafe maximum

temperatures.

User Manual

- 5 -