Britec WEH07 Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Britec WEH07. Britec WEH07 6 pages. Oscillating wall patio heater
Imprimer la page
After using the heater, it always must be turned off with rocker switch or remote controller and the power plug must
be pulled out of the socket.
Allow the heater to cool completely before moving and storage.
Never use the heater when there are bad weather conditions like rain, snow, hail, or a thunderstorm.
Pay attention that, no combustible material due to wind or other environmental influences covers or obstructs the
appliance, such as curtains, marquees, flags, plastic foil etc.
MAINTENANCE
Unplug the heater and let it cool down completely.
Keep the heater clean. The outer shell may be cleaned with soft, damp cloth. You may use a mild detergent
if necessary. After cleaning, dry the heater with a soft cloth.
Do not use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This
may cause damage or deterioration to the surface of the heater.
Do not immerse the heater in water or allow it to get wet.
Wait till the heater is completely dry before use.
Any type of maintenance or repairs including the replacement of heating tube should only be carried out by
a qualified electrician or by a recommended service center.
For a long time of inactivity, please protect the heater with a fabric cover from rain and dust.
SPECIFICATION
Power: 2000W(1000W/1000W), 50-60Hz/220-240V
Lamp: Carbon fiber
Weight: 3Kg
Item size: 630x140x300mm(LxWxD)
Cable length: 1.6m
Radiation area: 10 m
2
DISPOSAL
Waste electrical production should not be disposed of with household waste. Please recycle were facilities exist.
Check with your local authority or retailer for recycling advice.