Cequent ROLA Tool Rack 59792 Instructions d'installation
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Cequent ROLA Tool Rack 59792. Cequent ROLA Tool Rack 59792 4 pages.
Imprimer la page• Read, understand and follow all warnings and instructions before using this product. Failure to follow these directions
may result in property damage, serious bodily injury, and/or death. Cequent Performance Products is not responsible for
any property damage, personal injury, or death occurred while using any ROLA products. Retain these instructions for
future reference.
• Any modification or unintended use of this product voids any warranty and could create a hazardous condition.
• Loads must be secure according to local height and identification regulations and or laws.
• Secured loads and connections must be re-checked periodically for tightness.
• This product is designed for use on utility trailers with steel angle construction.
• When used on pick up truck beds, it is designed to be used with Cequent Performance Products Truck Rack #59742 and
Top Rail Accessory #59798 and secured to Top Rail using Top Clamp (Item 3). Accessories are sold separately.
• The mounting bracket is designed to sit on a flat surface. Some truck bed rails may permanently distort and conform to
the flat surface of mounting bracket.
6
9
Step 1
Top Rail Accessory
7
8
10
12
Figure 1.
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Product Name:
WARNING!
IMPORTANT NOTES:
Wing Nut
Figure 2.
1
2
2
3
4
5
13
11
Tool Rack
Product Code:
Required for Assembly: 7/16 & 9/16" Wrench
Step 1: Attach upright tube (6) to mounting bracket (9)
with the 3/8" hex bolt (10) and 3/8 locknut (13).
Firmly tighten 3/8 hex bolt.
Step 2: Find a suitable location and install upright tube &
mounting bracket assembly from step 1 to the trailer frame
as shown using rail clamps (12).
Securely tighten clamps and tighten wing nut against
bottom of clamp – see figure 2.
Step 3: Attach the tool holders (5) on the upright (6) as
shown using the specified hardware (7) (8) (4).
Step 4: Tighten the ¼-20 x.375 hex bolt (11) in the
mounting bracket to minimize movement.
Step 5. When used on Pickup trucks, secure upright tube
to top rail accessory – See important notes.
Optional: For permanent mounting use the pre-drilled
holes in the mounting bracket as a template, drill the truck
or trailer. Secure with four 3/8" Grade 5 lock washers, hex
nuts, and hex bolts (Purchased separately).
ITEM NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
Page 1 of 4
59792
DESCRIPTION
HEX BOLT 1/4-20 X .750 GR5
FLAT WASHER 1/4
TOP RAIL CLAMP
LOCKNUT 1/4-20 GR5
TOOL HOLDER ASSEMBLY
UPRIGHT TUBE
HEX BOLT 1/4-20 X 2.25 LG GR5
FLAT WASHER 1/4 (17/32" O.D.)
MOUNTING BRACKET
HEX BOLT 3/8-16 X 2.50 LG GR5
HEX BOLT ¼-20 X .375 LG GR5
RAIL CLAMP
LOCKNUT 3/8-16 GR5
59792N Rev B
Printed in China
QTY.
2
2
1
6
2
1
4
4
1
1
1
2
1
2-17-14