KitchenAid Dishwahser Instructions pour l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} KitchenAid Dishwahser. KitchenAid Dishwahser 11 pages.

Imprimer la page

FLEXI-FOLD DOWN

Flexible Tines

The row of tines on the left-hand and

right-hand sides of the mid-level rack

can be adjusted to make room for a

variety of dishes.

To adjust the fold-down tines=

1. Grasp the tip of the tine that is in

the tine holder.

2. Gently push the tine out of the

holder.

3. Lay the tines down, toward the

center of the rack.

SURE-HOLD ® Light Item Clips

The light item clips hold lightweight plastic items

such as cups, lids, or bowls in place during

washing.

To move a clip:

1. Pull the clip up and off the tine.

2. Reposition the clip on another tine.

Removable Mid Level Rack Inserts

Your dishwasher has two removable mid level rack inserts which

allow you to adjust the rack to the type of load you are washing.

A. Removable rack inserts

B. Insert holding clips

Removable Mid Level and Culinary Tool Racks

The removable racks allow you to

wash larger items such as stock

pots, roasters, and cookie sheets

in the lower level rack.

IMPORTANT: Remove dishes

prior to removing the mid level

rack from dishwasher.

To remove the rack:

A. Trackstop

1. To access track stops, pull the

B. Track

rack forward until it stops and

clicks into place.

2. To open track stops, flip the track stop to the outside of the

track.

3. After opening both track stops, slide front wheels up and out

of the slot in track. Continue to pull rack forward in track and

slide the back wheels up and out of the track.

4. Close track stops.

5. Slide rack tracks back into dishwasher.

To replace the rack:

1. Gently pull rack tracks forward in dishwasher until they stop

and click into place.

2. To open track stops, flip the track stop to the outside of the

track.

3. Place the back rack rollers on each side of the rack into the

track slot and roll the rack back into the tracks.

4, Insert front rack rollers on each side of the rack into the rack

slots.

5. Close track stops on both sides of rack and slide rack back

into dishwasher.

Culinary Tool Rack

The culinary tool rack is designed with 2 movable baskets to hold

extra silverware, knives and cooking utensils.

Install the baskets in this up position when you have extra

silverware and flatware to wash.

To install rack inserts:

Place the insert end legs under the front or back rack wire as

shown below. Push down on the center insert wire until it slides

into the holding clip on either side of the center in the bottom of the

rack.

A. Lift removable insert wire to remove from holding clips

B. Holding clips

To remove inserts:

Lift up on the insert wire located toward the center of the rack to

release the insert from the holding clips. Lift insert out of rack.

Up position

Install the baskets in this down position when you have extra

silverware, knives, or utensils requiring more room to wash.

IMPORTANT; When you are using the culinary tool baskets in the

down position, the mid level rack must also be in the lowest

position.

Down position