HIKVISION TurboHD H0T Series Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 17 pages. Turbo hd bullet & dome camera
Également pour HIKVISION TurboHD H0T Series : Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (17 pages)

3. Take apart the junction box, and align the screw

holes of the mounting base with those on the

Junction box's cover.

4. Install the mounting base on the junction box's

cover with screws.

Figure 2-16 Install the Mounting Base

5. Secure the junction box's body on the ceiling with

four PA4 × 25 screws and expansion bolts.

Figure 2-17 Secure the Junction Box's Body

6. Route the cables through the bottom cable hole, or

the side cable hole of the junction box.

7. Combine the junction box cover with its body.

Figure 2-18 Combine the Junction Box

8. Repeat the step 6 to 8 of 2.2.1 Ceiling/Wall

Mounting without Junction Box to finish the

installation.

2.3 Installation of Type III Camera

2.3.1 Ceiling/Wall Mounting without Junctin Box

Before you start:

The ceiling mounting and the wall mounting are similar.

Following takes ceiling mounting as an example.

Ceiling/Wall Mounting with Junction Box refers to 2.2.2

Ceiling/Wall Mounting with Junction Box.

Figure 2-15 The Drill Template