HIKVISION TurboHD H0T Series Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 15 pages. Turbo hd bullet & dome camera
Également pour HIKVISION TurboHD H0T Series : Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (17 pages)

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

1). Loosen the P screw to adjust the pan position [0°

to 360°]. Tighten the screw after completing the

adjustment.

2). Loosen the T screw to adjust the tilt position [0°

to 180°]. Tighten the screw after completing the

adjustment.

3). Loosen the R screw and rotate the camera [0° to

360°]. Tighten the screw after completing the

adjustment.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box separately.

Steps:

1. Paste the drill template on the ceiling/wall.

2. Drill screw holes and the cable hole in the

ceiling/wall according to the holes of the drill

template.

Figure 2-4 Drill Template of Junction Box

3. Take apart the junction box, and align the screw

holes of the bullet camera with those on the

Junction box' cover.

4. Fix the camera on the junction box's cover with

supplied screws.

Figure 2-5 Fix the Camera on the Junction Box's Cover

5. Attach the junction box body to the ceiling/wall by

aligning the screw holes of the junction box.

Figure 2-3 3-axis Adjustment

Junction

Box Cover