KitchenAid KDFX 6050 Fiche produit - Page 11
Parcourez en ligne ou téléchargez le pdf Fiche produit pour {nom_de_la_catégorie} KitchenAid KDFX 6050. KitchenAid KDFX 6050 16 pages.
Imprimer la page
HOW TO LOAD THE RACKS
CUTLERY RACK:
May be used in two different positions.
In position 2 the upper rack must be
lowered (see "Upper rack height
adjustment" C below).
For optimum washing results, position
cutlery as shown (handles of spoons facing
inwards).
Beware of sharp/pointed items. Risk of
injury!
Cutlery holder
A May be removed individually, depending on upper rack load.
UPPER RACK - depending on model:
Adjustable glass holder
B Depending on the position, for small glasses or stemware.
Rack height adjustment
C The upper rack height can be changed even when loaded.
Lower adjustment: pull out the two side handles C and
lower the rack.
Upper adjustment: pull the two handles C up until the rack
clicks into place (standard position).
The two handles C must be level.
Washing without the upper rack/cutlery rack
If the appliance is fitted with the adjustable retainers as
shown in the figure, the upper rack/cutlery rack can be
removed to accommodate larger items such as cake pans.
Open the two retainers D and slide the upper rack/cutlery
rack out.
When the upper rack/cutlery rack is in place, the retainers must always be closed
LOWER RACK - depending on model:
Plate holders
E Partially folding for maximum rack loading flexibility.
Dynamic Clean
F On selecting this option, an intensive wash cycle is run
using the special nozzles at the rear of the dishwasher.
1. Turn the plate holder in the sector as marked.
2. Position the pots with the insides facing the
nozzles.
Cutlery holder
G With the "Half load/Multizone" option, use
the lower rack and press the "Half
load/Multizone" button once.
Arrange crockery so that water does not collect in cavities and the spray arms can turn freely.
Only use dishwasher-proof dishes. Do not use the dishwasher for washing wooden items,
aluminium, tin, silver cutlery or decorated crockery (unglazed).
Position 1
Retainer open
11
Position 2
Retainer closed