Ganz ZP-EPC10 Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Ganz ZP-EPC10. Ganz ZP-EPC10 20 pages. Ganz zp-epc10 protocol converter

Imprimer la page

Implementation

Introduction

This installation guide is designed for the use of persons concerned with the installation

and configuration of the protocol converter and any devices connected to it. Relevant

international, national and – if applicable – local electronic engineering standards should

be observed at all times.

Intended use

The ZP-EPC10 protocol converter is designed to provide an interface between the CEC

C328 matrix switcher and the dome cameras of the SMD series from CBC. The device

converts the data transfer between protocols RS422 and RS485. The unit is designed

exclusively for this function. No other application is permitted.

For further information on operating aspects that are not covered in this guide, please

CBC (Deutschland) GmbH

Hansaallee 191

D – 40549 Düsseldorf

Phone: +49 (0) 211 53 06 70

Fax: +49 (0) 211 53 06 71 80

EU directives

The ZP-EPC10 protocol converter fulfils the specifications of European Union directive

89/336 (covering electromagnetic compatibility).

Identification plate

Precise identification of each unit is provided by the plates attached to the front and rear

of the housing, which show the model designation and serial number. Keep these details

for reference, should you have questions or for ordering spare parts.

Model:

Serial Number:

CBC (Europe) Ltd.

7/8, Garrick Industrial Centre, Irving Way

GB – London NW9 6AQ

Phone +44 (0) 181 732 3310

Fax +44 (0) 181 202 3387

ZP-EPC10