DecoRad HandMate UV600 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DecoRad HandMate UV600. DecoRad HandMate UV600 17 pages. Ultimate tool for instantly curing uv (floor) coatings
Également pour DecoRad HandMate UV600 : Manuel rapide (2 pages)

Imprimer la page

Handmate UV 600 v. 2.4

4.1 STARTING THE JOB

Press the ON button

The indicator will burn

On the display of the handunit the tekst DONE will appear.

Press

the

button

with

the

"lamp

symbol"

On the display of the lamp unit the text WAIT will be shown

As soon as the lamp is warm, the text DIM will be shown

in the display.

DISTANCE BETWEEN LAMPUNIT AND SURFACE: 2 –

4 CENTIMETERS

Use the button on the lampunit or the extension handle to

open the shutter and to start UV curing. The text FULL will

be shown on the display.

DIST = distance to surface is not correct, a beeping signal

can be heard.

On the bottom of the lamp unit a shutter will slide in front

of the UV bulb, UV curing is not possible any longer.

Move the lamp unit in a position between 2 – 4 centimeters

from the surface. DIM will be shown on the display. The

lamp can go to FULL and curing can be started again.