GREEN SERIES FITNESS CIR-TM7000E-G Procédure de mise à niveau - Page 14

Parcourez en ligne ou téléchargez le pdf Procédure de mise à niveau pour {nom_de_la_catégorie} GREEN SERIES FITNESS CIR-TM7000E-G. GREEN SERIES FITNESS CIR-TM7000E-G 20 pages. Suspension upgrade procedure
Également pour GREEN SERIES FITNESS CIR-TM7000E-G : Procédure (3 pages)

Imprimer la page

2.19.

Slide both RT & LT side rails back on treadmill. Note: Do not tighten Allen bolts down at this

time.

2.20.

Re-install both RT & LT rear roller cover mounts. Easiest to put screw driver through rear top

hole securing screw with washer to lower mount and reattaching loosely to frame. Then install the

second screw with washer with finger holding side of screw to line up hole to screw end. Thus not

losing washer during the installation of screw and reattaching loosely to frame.

www.GreenSeriesFitness.com

©December 2014

Call Toll free at (800) 269-7130