Ganz Thermal ZNT1-H Series Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Ganz Thermal ZNT1-H Series. Ganz Thermal ZNT1-H Series 2 pages.

Imprimer la page

1) Insert the two provided

stem bumpers to the holes

at the bottom of the

sunshield.

Installing with Bracket/Adaptor

There are currently 7 optional accessories such as wall mount bracket,

corner mount bracket, and so on. Please refer to the corresponding

accessory's installation guide for the installation instructions.

Setting up network environment

The default IP address of the device is 192.168.XXX.XXX. Users can identify

the IP address of the device by converting the MAC address's hexadecimal

numbers. The MAC address is at the bottom of the device. Be sure that the

device and the PC are on the same network area before the installation.

Generic IP Environment

Convert the device's MAC address to the IP address. Refer to the

Hexadecimal-Decimal Conversion Table at the end of this manual

MAC address = 00-13-23-01-14-B1 -> IP address = 192.168.20.177

Convert the last two sets of hexadecimal numbers to decimal numbers.

IPAdminTool

IPAdminTool is a management tool to automatically scan all the network

products for the devices' administrative tasks, which include network

configurations, firmware update, device reboot, factory default, and device

organization.

1 CH Encoder

To modify the device's default IP address for a customized network area;

1) Find the device from IPAdminTool's list, and highlight the device's name.

2) Right-click the mouse, and select IP Address, and select either Single or

Multiple depending on the selected number of devices.

3) Type the new network information including IP Address. The image above

shows the Single IP Change window only. Refer to the manual for

IPAdminTool in case you need the instructions to change multiple IP

addresses.

4) Enter ID and PW(if the device's ID and PW have never been changed,

check the checkbox of 'Use default ID/PW'.)

5) Click Apply.

Viewing video on web page

Once the device's IP address has been identified, type the URL in a web

browser to access the camera. At the first time access, the installation

window like below may pop up.

2) Place the sunshield on

top of the camera body,

and, snap the sunshield

to the base mount.

Encoder1

Encoder2

Encoder3

Encoder4

Encoder5

Encoder6

Encoder7

Encoder8

Encoder9

Encoder10

Encoder11

Encoder12

Encoder13

Encoder14

Encoder15

Encoder16

Current PC environment Info

Give a new unique IP address in the last two sets

and mirror other information in the other boxes.

CBC AMERICAS CORP. - EAST COAST +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600 | MEXICO +52 (55) 5280 4660

1) When the browser asks to install the AxUMF software, click Install to

proceed.

2) When the Setup installation pop-up window appears, click Install to

preceed with the rest of the installation.

SETUP page

To setup the device configuraiton:

1) Click Setup on the upper left corner of the web page.

2) Enter the user name and the password when the login page is displayed.

(The default user name and the password are root and pass.)

3) Click OK.

To learn how to set up the camera on the web page for the advanced

configurations, refer to the web page user's manual.

Reboot

You can reboot the device via the camera's webpage, too.

1) Go to Setup > Maintenance > Reboot.

2) Click Reboot to reboot the device.

*How to reboot on the device is found in the part names and functions section on the previous page.

Factory Default

You can initialize the current settings to the factory default values via the

camera's webpage, too.

1) Go to Setup > Maintenance > Reset All Settings.

2) Select the items that you want to keep from the initialization among

network settings, user account information, and time zone setting.

3) Click Reset All Settings.

*How to do factory default on the device is found

in the Part names and functions section on the previous page.

Safe mode

Your device will get restarted in safe mode if the device does not completely

boot certain times. The main causes for safe mode are as follows.

* The power supply is continually unplugged certain times in the middle of system

booting.

* The firmware files required for system booting are damaged.

* There are conflicts in the system settings.

You will see the page to indicate that your device is in safe mode and to

guide you what to do in steps. Follow the instructions on the webpage

according to each step.

NOTE

One of the methods to update firmware is using IPAdminTool. Please refer

to the manaul for IPAdminTool for the detailed procedure.

NOTE

If your device is still in safe mode after trying to update firmware, please

contact your local agency to get further assistance.

Hexadecimal-decimal conversion table

Refer to the following table when converting the MAC address of your device

to IP address.

Hex

Dec

Hex

Dec

Hex

Dec

Hex

Dec

Hex

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

100

137

101

138

102

139

103

140

104

141

105

142

106

143

107

144

108

145

109

146

110

147

Dec

Hex Dec

Hex

Dec

148

185

222

149

186

223

150

187

224

151

188

225

152

189

226

153

190

227

154

191

228

155

192

229

156

193

230

157

194

231

158

195

232

159

196

233

160

197

234

161

198

235

162

199

236

163

200

237

164

201

238

165

202

239

166

203

240

167

204

241

168

205

242

169

206

243

170

207

244

171

208

245

172

209

246

173

210

247

174

211

248

175

212

249

176

213

250

177

214

251

178

215

252

179

216

253

180

217

254

181

218

255

182

219

183

220

184

221

ganzsecurity.com. 01/17