IKEA tradfri Manuel de l'utilisateur - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} IKEA tradfri. IKEA tradfri 36 pages. Motion sensor
Également pour IKEA tradfri : Manuel d'instructions de montage (36 pages), Manuel d'instructions de montage (24 pages), Manuel (12 pages), Manuel (28 pages), Manuel (20 pages), Manuel (16 pages), Manuel (20 pages), Manuel rapide (36 pages), Manuel (16 pages), Manuel (32 pages), Manuel (12 pages), Manuel (8 pages), Manuel (24 pages), Manuel (24 pages), Manuel (32 pages), Manuel (24 pages), Manuel (32 pages), Manuel (32 pages), Manuel (24 pages), Manuel (12 pages), Manuel (24 pages), Manuel (24 pages), Manuel (24 pages), Manuel (29 pages), Manuel (12 pages), Manuel de démarrage rapide (12 pages), Manuel (40 pages), Manuel de démarrage rapide (24 pages), Manuel de démarrage rapide (16 pages), Manuel (16 pages), Manuel (24 pages), Manuel (32 pages), Manuel de démarrage rapide (2 pages), Manuel (40 pages), Manuel de démarrage rapide (16 pages), Manuel (36 pages), Manuel (28 pages), Manuel de démarrage rapide (2 pages), Manuel (32 pages), Manuel (32 pages), Manuel (24 pages), Manuel d'instructions (8 pages), Manuel (24 pages), Manuel de démarrage rapide (4 pages), Manuel (8 pages), Manuel (20 pages), Manuel (12 pages), Manuel (8 pages), Manuel (32 pages), Manuel de démarrage rapide (4 pages), Manuel (48 pages)

Imprimer la page

ENGLISH

REMOTE CONTROL FUNCTIONS

ON/OFF: Press to turn your light source on and off.

Press and hold for at least 3 seconds to synchronize

your lights.

Dim up/down: Short presses will dim up/down in

steps. To dim up/down seamlessly, press and hold

the button.

Change white spectrum, colours or scenes.

Pairing: Add IKEA Smart Lighting products to your

system. See instructions below.

ADDING DEVICES TO YOUR REMOTE CONTROL

When the remote control is sold together with a light

source (in the same package), they are already paired.

If the remote control is purchased separately, you must

manually pair it to your light source.

To add light sources, just repeat the steps below.

1. Make sure that your light source is installed and the

main power switch is turned on.

2. Hold the remote control close to the light source you

want to add (no more than 5 cm away).

3. Press and hold the pairing button

seconds. A red light will shine steadily on the remote

control. Your light source will begin to dim and flash

one time to indicate that it has been successfully

paired.

Up to 10 light sources can be paired with 1 remote

control.

Make sure to pair them one at a time. If the light sources

are close to each other, disconnect those that have

already been paired from the main power switch.

REMOVING DEVICES FROM YOUR

REMOTE CONTROL

1. Make sure the main power switch is turned on for the

2. Hold the remote control close to the light source you

3. Press and hold the pairing button

FACTORY RESET YOUR DEVICES

For light sources:

Toggle the main switch 6 times.

For remote control:

Press the pairing button

for at least 10

SYNCHRONIZING

If your light source becomes unsynchronized, press

and hold the ON/OFF button

to return the light source to its default setting (100%

brightness, 2700K).

light source you want to un-pair from your TRÅDFRI

remote control.

want to remove (no more than 5 cm away).

seconds. A red light will shine steadily on the steering

device. Your light source will begin to dim and flash

twice to indicate that it has been successfully un-

paired.

for at least 10

4 times within 5 seconds.

for at least 3 seconds