Avantco 178CBE84HC Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco 178CBE84HC. Avantco 178CBE84HC 12 pages. Refrigerated chef bases
Également pour Avantco 178CBE84HC : Manuel de l'utilisateur (13 pages)
Imprimer la page
User Manual
Refrigerated Chef Bases
Troubleshooting
Problem
Possible Solution
Fuse blown or circuit breaker tripped
Replace fuse or reset circuit breaker.
Power cord unplugged
Plug in power cord.
Compressor is not running
Thermostat set too high
Set thermostat to lower temperature.
Cabinet in defrost cycle
Wait for defrost cycle to finish.
Excessive amount of warm product placed in cabinet
Allow adequate time for product to cool down.
Dirty condenser oil
Condensing units run for
Clean the condenser coil.
long periods of time
Evaporator coil iced over
Unplug unit and allow coil to defrost. Make sure thermostat is not set too
cold.
Thermostat set too warm
Set thermostat to lower temperature.
Airflow blocked
Re-arrange product to allow for proper air flow. Make sure there is at
least four inches of clearance from evaporator.
Excessive amount of warm product placed in cabinet
Allow adequate time for product to cool down.
Cabinet temperature
Fuse blown or circuit breaker tripped
is too warm
Replace fuse or reset circuit breaker.
Dirty condenser coil
Clean the condenser coil.
Evaporator coil iced over
Ensure doors are closed when not in use.
Low refrigerant levels
Contact a service technician to check refrigerant levels.
Condensation is collecting on
Relative humidity is above 60%
the cabinet and/or floor
Move unit to area below relative humidity or lower humidity level.
www.AvantcoRefrigeration.com
12