Avantco 178Z1R2D Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco 178Z1R2D. Avantco 178Z1R2D 9 pages. Top mount reach-in refrigerator and freezer
Imprimer la page
Troubleshooting
Compressor is Not Running
Fuse blown or circuit breaker tripped.
Power cord unplugged.
Thermostat set too high.
Cabinet in defrost cycle.
Cabinet Temperature Is Too Warm
Thermostat is set too high.
Airflow is blocked.
Low refrigerant levels.
Door is slightly ajar.
Interior Light Is Not Working
Poor switch connection.
Bulb is not connected.
Bulb has burned out.
Fust blown or circuit breaker tripped.
Dirty condensor coil.
Condensation Is Collecting on the Cabinet and/or Floor
Gasket is not sealing properly.
User Manual
Replace fuse or reset circuit breaker.
Plug in power cord
Set thermostat to lower temperature.
Wait for defrost cycle to finish.
Set thermostat to lower temperature.
Re-arrange products to allow for proper air flow. Make
sure there is at least four inches of clearance from the fan.
Contact a service technician to check refrigerant levels.
Make sure door is completely closed.
Poor switch connection.
Make sure the bulb is correctly inserted in the socket.
Replace the bulb.
Replace fuse or reset circuit breaker.
Clean the condensor coil.
Clean, repair, or replace the gasket as necessary.
- 9 -