IKEA DISKAD Manuel d'instruction - Page 49
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} IKEA DISKAD. IKEA DISKAD 50 pages.
Également pour IKEA DISKAD : Manuel (36 pages), Manuel (16 pages), Manuel (45 pages), Manuel (37 pages)
Imprimer la page
Removal
Also observe
the sequence of worksteps here.
Disconnect the appliance from the
1.
power supply.
Turn off the tap.
2.
Undo the waste water and drinking
3.
water connection.
Loosen fastening screws for the
4.
furniture parts.
If fitted, remove the base panel.
5.
Pull out the appliance, carefully
6.
pulling the hose behind.
Installation and connection en
Transporting
Empty the dishwasher and secure loose
parts.
Drain the appliance according to the
following steps:
Turn on water supply.
1.
Switch on ON/OFF switch (.
2.
Select programme with the highest
3.
temperature.
The estimated programme duration
appears in the display window h.
Press START button `.
4.
Programme sequence starts.
After about 4 minutes, repeatedly
5.
press the START button ` until
:
appears in the display window.
After about 1 minute the display
window will show :
Switch off ON/OFF switch (.
6.
Turn off water supply, disconnect
7.
supply hose and drain water.
Note: Always transport the dishwasher
upright. This prevents residual water
from getting into the machine's controls
and causing the programme sequence
to malfunction.
Protection against frost
I f the appliance is in a room where
P r o t e c t i o n a g a i n s t f r o s t ( E m p t y i n g t h e a p p l i a n c e )
there is a risk of frost (e.g. holiday
home), empty the appliance completely
(see Transportation).
.
49