IKEA HYGIENISK Manuel - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA HYGIENISK. IKEA HYGIENISK 28 pages.
Également pour IKEA HYGIENISK : Manuel (32 pages), Manuel (32 pages), Manuel (28 pages), Manuel (29 pages)

IKEA HYGIENISK Manuel
ENGLISH

Options

Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you select non
compatible options, the
appliance automatically
deactivates one or more of them.
Only the indicators of the still
active options are on.
If an option is not applicable to a
programme, the related indicator
is off or it flashes quickly for a
few seconds and then goes out.
Activating options can affect the
water and energy consumption
as well as the programme
duration.
DryPlus
Activate this option to boost the drying
performance.
The combination of DryPlus and rinse aid
ensures even better drying results.

Settings

Programme selection mode and user
mode
When the appliance is in programme
selection mode, it is possible to set a
programme and to enter user mode.
Settings available in user mode:
DryPlus is a permanent option for all
programmes other than P4 (ECO). It is
automatically activated in next cycles. This
configuration can be changed at any time.
Every time P4 (ECO) is activated,
DryPlus is off and needs to be
chosen manually.
How to activate DryPlus
Press
.
The related indicator is on.
The display shows the updated programme
duration.
ExtraHygiene
This option provides better hygiene results
by keeping the temperature at 70 °C for at
least 10 minutes during last rinsing phase.
How to activate ExtraHygiene
Press
.
The related indicator is on.
The display shows the updated programme
duration.
The ExtraHygiene option is not applicable
to the following programmes:
• P5 (Glass)
• P6 (Rinse & Hold)
• P7 (Extra Silent)
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of the acoustic
signal for the end of a programme.
• Selection of the colour of the TimeBeam.
• Activation or deactivation of the
AutoOpen.
12