HIKVISION DS-2CE79U8T-IT3Z Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION DS-2CE79U8T-IT3Z. HIKVISION DS-2CE79U8T-IT3Z 16 pages. Turbo hd 4k series vf bullet & turret & dome camera
Également pour HIKVISION DS-2CE79U8T-IT3Z : Manuel de démarrage rapide (17 pages)
Imprimer la page
8. Repeat steps 5 to 9 of 2.2.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
2.3 Installation of Type III Camera
2.3.1 Ceiling Mounting
Before you start:
Both wall mounting and ceiling mounting are suitable
for the dome camera. Ceiling mounting will be taken as
an example in this section. And you can take steps of
ceiling mounting as a reference for wall mounting.
Steps:
1. Paste the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on
the ceiling according to the supplied drill template.
Note:
Drill the cable hole when adopting the ceiling outlet
to route the cable.
3. Loosen the screws on the bubble of the dome
camera to remove the bubble and the black liner.
4. Attach the back box to the ceiling, and secure them
with supplied screws.
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling/wall, expansion bolts are
required to fix the camera. For wooden ceiling/wall,
self-tapping screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Align the camera with the back box, and tighten the
screws to secure the camera with the back box
Figure 2-15 Fix the Junction Box
Figure 2-16 The Drill Template
Figure 2-17 Attach the Back Box