IKEA IUD9500WX0 Manuel d'instructions d'installation - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} IKEA IUD9500WX0. IKEA IUD9500WX0 44 pages. Undercounter dishwasher plastic giant tub models
Également pour IKEA IUD9500WX0 : Instructions pour l'utilisateur (25 pages)
Imprimer la page
_
_ _i,_*_,,_
_ 2 _¸
_ _
_
_
Check "Electrical Requirements" section.
You need to:
•
have the correct electrical supply and recommended
grounding method.
If you are"
•
direct wiring use Option 1.
•
using a power supply cord, use Option 2.
Option 1: Direct Wiring
1. Route direct wire so that it does not touch dishwasher motor
or lower part of dishwasher tub.
2. Pull direct wire through hole in terminal box.
Helpful Tip:
•
Select the proper size twist-on
connectors to connect your
household wiring to 16-gauge
dishwasher wiring.
•
Insert wire ends into twist-on
connector. Do not pre-twist bare
wire.
•
Twist connector.
•
Gently tug on wires to be sure both
are secured.
3. Connect the wires as follows using
twist-on connectors sized to
connect direct wire to 16-gauge dishwasher wire.
Power supply wire:
Terminal box wire:
white
_->
white
black
_->
black
ground wire
_->
ground connector
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal
box.
Do not use an extension
cord.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
4=
Form bare ground wire into a U-shaped hook. Wrap ground
wire hook clockwise around ground connector and under the
washer.
5. Securely tighten ground connector.
O
c
A. Ground wire
B. Washer
C. Ground connector
6. Tighten clamp connector or conduit connector screws.
A
A. Screws
7. Reinstall terminal box cover with wires inside terminal box.
The cover must be outside the box on the left side.
££Zi_£ZZZZZZZZZiC£ZZZZZZZZZIi_
,_--X
8.
Make sure no wires are pinched
by the cover.
17