ENGLISH
1. Adjust the water softener to the lowest
level.
2. Set the rinse aid dispenser to the lowest
position.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Press the on/off button to activate the
appliance.
2. Set the water softener to the highest lev-
el.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse aid.
Setting and starting a programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door to start the
programme.
• The programme is completed.
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when, af-
ter the activation, the indicator of
on.
If the control panel does not show this con-
dition, press and hold, at the same time
and
until the indicator of
comes on.
Starting a programme without delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. The indicator of the
programme comes on.
3. Set a programme.
• If you want to start the
gramme, close the appliance door.
• If you want to set a different pro-
gramme, press the button of the pro-
gramme you want to set. The related
programme indicator comes on.
4. Close the appliance door. The pro-
gramme starts.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again
until the indicator of the number of hours
you want to set comes on (3, 6 or 9).
• The delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• When the countdown is completed, the
programme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while the
countdown operates
When you cancel the delay start you have
to set the programme and options again.
1.
Press and hold, at the same time,
and
comes on.
Cancelling the programme
1.
Press and hold, at the same time,
is
and
comes on.
Make sure that there is detergent in
the detergent dispenser before you
start a new programme.
At the end of the programme
When the programme is completed, the
end indicator is on.
1. Press the on/off button or wait for the
Auto Off function to automatically deac-
tivate the appliance.
2. Close the water tap.
pro-
until the
indicator
until the indicator of
11
Imprimer la page