Avantco SL312 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco SL312. Avantco SL312 6 pages. Meat slicer
Également pour Avantco SL312 : Manuel de l'utilisateur (7 pages)

Imprimer la page

User Manual

Blade Sharpening

1. This operation should be undertaken if the cutting blade becomes dull. It should be noted that the blade is made

from hardened material and under normal use should only need sharpening once a year.

2. Unplug the unit.

3. Ensure that the slice thickness knob is in the '0' position.

4. CAREFULLY clean the part of the blade to be sharpened.

5. Unlock the sharpening device using the safety locking screw. Lift up the sharpening assembly and rotate it 180° so

that both grinding wheels are in the correct position. Lower the sharpening device and lock in position.

6. Set the slice thickness knob to position 'Z'

7. Plug in the machine and switch on.

8. Using the button at the rear of the sharpening unit, push the stone against the rotating blade for approximately

30 seconds.

9. After sharpening, it is important to remove the bar from the blade using the grinding wheel and push button located

at the front of the sharpening device. This should be done for 2-3 seconds.

10. After sharpening is complete return the slice thickness knob to the '0' position and return the sharpening device to

is original position by unlocking the safety screw and rotating by 180°.

Electrical Connection Information

Model

Description

SL309

Avantco Slicer 9"

SL310

Avantco Slicer 10"

SL312

Avantco Slicer 12"

SL512

Avantco Slicer 12" Medium Duty

Technical Specification

Model

Blade Dia.

SL309

SL310

10"

SL512

12"

SL312

12"

Volts /HZ

120 / 60

Cut Thickness

Cut Capacity

0 - 0.4"

6.3 x 7.5"

0 - 0.4"

6.7 x 7.5"

0 - 0.6"

9.3"x 6"

0 - 0.6"

9.4x 6"

Watts

Plug Type

1/4 HP

280 W

NEMA 5-15P

1/4 HP

420 W

NEMA 5-15P

1/3 HP

520 W

NEMA 5-15P

1/2 HP

520 W

NEMA 5-15P

Net Weight

29lbs

32lbs

64lbs

54lbs