Avantco UDD1 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco UDD1. Avantco UDD1 17 pages.

Installation & Operation

If the unit has recently been transported on its side, please let the unit stand upright for a

minimum of 24 hours before plugging it in.

1 . Remove the outer packaging . All of the packaging (including cardboard, bubbles and plastic

wrap) should be removed from the unit .

2 . Move the unit as close to the final location as possible before removing the wooden pallet .

3 . Use a screwdriver to remove the screws

from the L-bracket connecting the unit to

the wooden pallet .

4 . Remove pallet by unscrewing all base rail

anchor brackets . Place pallet to the side .

5 . Carefully upright the cabinet .

Caution: When lifting unit

do not use the countertop

as a lifting point.

- Install the unit on strong and level surfaces, keep the cooler

stable to avoid vibration and noise .

- Install the unit in an indoor, well-ventilated area . A space of at

least 3" should be allowed between the surrounding walls and the

cabinet wall for air circulation .

- Unit should be placed far from any heating source to avoid

decrease of refrigeration efficiency .

- Install the cooler in a dry place to prevent rust from forming on

the compartment body, which may affect electrical insulation .

- The appliance shall not be exposed to rain or sun . Outdoor use

may cause decrease in efficiency and damage to the unit .

- The unit should be placed close enough to the electrical outlet

so that extension cords are never used .

Caution: Problems caused by improper

position of units are not covered by warranty

User Manual

- 3 -