IKEA SKINANDE Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} IKEA SKINANDE. IKEA SKINANDE 24 pages. Dishwasher
Également pour IKEA SKINANDE : Manuel de l'utilisateur (48 pages), Manuel (24 pages), Manuel de l'utilisateur (4 pages), Manuel (48 pages), Manuel (16 pages), Manuel (32 pages), Manuel d'instructions d'installation (16 pages), Manuel (28 pages), Manuel (28 pages), Manuel (48 pages)

IKEA SKINANDE Manuel de l'utilisateur
ENGLISH
2. Press the delay button again and again
until the display shows the delay time
you want to set (from 1 to 19 hours).
• The delay time flashes in the display.
• The delay indicator is on.
3. Close the appliance door. The count-
down starts.
• If you open the door, the display
shows the countdown of the delay
start that decreases with steps of 1
hours.
• When the countdown is completed, the
programme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start
Press and hold function buttons (B) and (C)
at the same time until:
• The delay indicator goes off.
• All the programme indicators come on.
When you cancel a delay start, the ap-
pliance goes back to setting mode.
You have to set the programme again.
Cancelling the programme
Press and hold function buttons (B) and (C)
at the same time until all the programme in-
dicators come on.
Make sure that there is detergent in
the detergent dispenser before you
start a new programme.

Hints and tips

The water softener
Hard water contains a high quantity of min-
erals that can cause damage to the appli-
ance and bad washing results. The water
softener neutralises these minerals.
The dishwasher salt keeps the water soften-
er clean and in good conditions. It is impor-
tant to set the right level of the water soft-
ener. This makes sure that the water soften-
er uses the correct quantity of dishwasher
salt and water.
At the end of the programme
When the programme is completed, an in-
termittent acoustic signal operates and the
display shows 0.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
• If you do not deactivate the appliance,
after 3 minutes from the end of the pro-
gramme:
– All indicators go off
– The display shows 1 horizontal status
bar.
• This helps to decrease the energy con-
sumption.
Press one of the buttons (not the on/off
button), the display and the indicators
come on again.
• Let the dishes become cold before
you remove them from the appli-
ance. Hot dishes can be easily dam-
aged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and
on the door of the appliance. Stain-
less steel becomes cool more quickly
than the dishes.
Loading the baskets
Refer to the supplied leaflet with ex-
amples of the load of the baskets.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items made
of wood, horn, aluminium, pewter and
copper.
12