BERNHARDT design solem Assemblage de la base

Parcourez en ligne ou téléchargez le pdf Assemblage de la base pour {nom_de_la_catégorie} BERNHARDT design solem. BERNHARDT design solem 3 pages.

Imprimer la page
IMPORTANT NOTE
Failure to install product according to installation instructions will result in loss of warranty.

Parts List

A
Worksurface (1x)
Each Solem Table has a corresponding worksurface and base assembly.
Worksurfaces are shipped with the cross rails attached for ease of installation.
B
Bent End Leg Assembly (2x)
C
Stud Connector (8x)
Each Bent End Assembly accepts (4x) Stud Connectors into pre-installed threaded inserts.
D
Stud Housing (8x)
Stud Housings insert into pre-machined holes in the cross rails to capture the Stud Connectors during assembly of the complete table.
E
Grub Screw (8x)
Grub Screws thread into each Stud Housing to secure the Stud Connectors to the Stud Housing.
F
#10 x 3/4" Washer Head Screws (12x)
G
#8 x 3" Washer Head Screws (10x)
H
#8 x 3/4" Flat Head Screws (28x)
A
C
D
October 2016
F
E
solem base assembly
B
G
H