BERNHARDT design yuno Instructions pour l'installation électrique - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions pour l'installation électrique pour {nom_de_la_catégorie} BERNHARDT design yuno. BERNHARDT design yuno 8 pages.

Imprimer la page

Dual Under Mount Power and Connection

Yuno offers a proprietary under mount power solution allowing quick and easy "daisy chaining" tables together. For

dual module configurations, up to 4 tables may be connected on a single power infeed. The dual under mount

power configuration features a single receptacle and dual port USB module mounted at each end of the

worksurface. The power assembly and the Yuno tables are UL962 and CSA 22.2, No. 203.2 approved. The

illustration below is of a Yuno starter table which must be specified to begin a run of tables.

Installation Accessories

Dual Under Mount Power Module

Contains (1) 15 amp receptacle and (2) amp USB ports for

each dual power module

Modular Connector

A modular connection to help the user connect multiple work

surfaces.

Power Module Control Unit

Control module with 10' grounded plug. Allows users to

connect up to 8 modules off of one feed, (4) dual

under mount power tables.

Power Module Wiring

A plug designed to be inserted into a receptacle in one

position only

Wire Management Clip

Attaches to the bottom of the table, helps secure whips

when connected. Approved for GSA.

Connection Instructions

When starting to connect your power you first need to identify your starter table SKU (pictured above is a starter table, found with a power

module control unit and grounded plug). Next you will want to gang your starter table with your first add-on table using the separately

purchased ganging brackets. To power the add-on table, pull the long modular connector wire from the starter table through the wire

management clips. Locate the modular connector near the edge of the adjacent table trough. Match the keying, indicated by the arrows on

the modular connects, and press the connectors together. Repeat for all tables in line.

Starter Table

Left Power Infeed

Add-on Table

Left Power Add-On

After you have finished connecting your jumper whips you can tuck them back into the

table trough, a concealed under mounted storage system, and move on to connecting

your next table. Keeping in mind that with a dual power module system you can connect

four tables.

yuno electrical installation instructions

Note: All power and wiring is pre-installed on starter and

add-on tables. Specify a right or left power infeed for the

starter and add-on table configurations.

dual under mount power